MCM260X-5AD

Modbus and CANbus to Analog IO
  • Features
    • Thermocouple Inputs
    • 4-20mA Inputs
    • 0-10V Inputs
    • RTD Inputs
    • Potentiometer Inputs
    • 4-20mA Output
    • 0-10V Output
    • CANopen or Modbus DIP Switch Selectable
    • RS485




Modbus and CANbus to Analog IO

Modbus and CANbus to Analog IO Infographics

The MCM260X-5AD is an Analog to Modbus or CANbus converter. The input is selectable from thermocouples, 4-20mA, 0-10V, RTD's, potentiometers or thermistors. The output is selectable between 4-20mA or 0-10V output. With the DIP switches either Modbus or CANbus is selectable and is able to operate at a speed of 57500 baud rate as a Modbus slave and 1 Mbit/sec on the CANopen. The input is selectable from K type thermocouple, J type thermocouple, S type thermocouple, R type thermocouple, Pt100, Pt500, Pt1000, Ni100K RTD's. PTC, NTC thermistor. 0-20mA , 4-20mA. 0-1 V, 0-10V and potentiometers. The MCM260X-5AD is small in size and is DIN rail mounted.

MCM260X-5AD Specifications

Analog Input
Thermocouples K,J, R and S type
Current 0-20mA , 4-20mA.
Voltage 0-1Volt, 0-10Volt.
RTD's Pt100, Pt500, Pt1000, 500Ni.
Thermistors PTC, NTC
Potentiometer 0-6, 1-150 K Ohm.
Analog Output
Current 4-20mA
Voltage 0-10Volts
Power Supply 12...24Vac/Vdc.
Power Consumption 20VA max.
Temperature Range Operative-32°F +113°F -0°C +45°C
Humidity (non condensing) 35-95%.
Housing DIN Rail
Dimensions 3.5" x 2.8" x 2.3", 90 x 71 x 58 mm
Weight 14 oz 460 g
EMC For industrial environments.
Immunity: EN 61000-6-2.
Emission: EN 61000-6-4.
Configuration PC Configurable, USB.

MCM260X-5AD Wiring Connections

Power Supply
Positive 12...24Vdc Terminal 1
Negative Terminal 2
Input Analog Input 1Analog Input 2Analog Input 3Analog Input 4
Thermocouple + Terminal 5 Terminal 8 Terminal 18 Terminal 21
Thermocouple - Terminal 6 Terminal 9 Terminal 19 Terminal 22
RTD Leg 1 Terminal 5 Terminal 10 Terminal 18 Terminal 21
RTD Leg 2 Terminal 6 Terminal 9 Terminal 19 Terminal 22
RTD Common Terminal 7 Terminal 10 Terminal 20 Terminal 23
Thermistor Leg 1 Terminal 5 Terminal 8 Terminal 18 Terminal 21
Thermistor Leg 2 Terminal 7 Terminal 10 Terminal 20 Terminal 23
mA and Voltage Input + Terminal 5 Terminal 8 Terminal 18 Terminal 21
mA and Voltage Input - Terminal 7 Terminal 10 Terminal 20 Terminal 23
Potentiometer Leg 1 Terminal 5 Terminal 8 Terminal 18 Terminal 21
Potentiometer Leg 2 Terminal 7 Terminal 10 Terminal 20 Terminal 26
Analog Output Analog Output 1Analog Output 2
Positive Terminal 11 Terminal 24
Negative Terminal 12 Terminal 25

MCM260X-5AD

Modbus and CANbus to Analog IO wiring diagram

Pixsys Electronics USA

Pixsys Electronics products are sold and supported by Datexel LLC in the USA.

Contact

☏ 561 779 5660

✉ Info@pixsys.com

🏤 Jupiter, Florida, USA.