The DRR450 Multizone temperature controller is mounted on a solid state relay (SSR) and can measure and control temperature and current. The temperature can be controlled with high accuracy to ensure high-quality production. The multizone SSR mounted temperature controller is designed to fit onto a solid state relay heat sink. The DRR450 is designed to be used on plastic extrusion lines, injection moulding, hot runner lines and other heat control lines. It can be used with supervisory software.
The DRR450 accepts inputs from K, J, T, and E Type thermocouples. There is also a 50 Amp current transformer input.
The DRR450 has on-off control with hysteresis, proportional control, proportional integral control, proportional integral, and derivative control. This control can be set up manually or with Autotuning.
DRR450 Specifications
Input
°F
°C
K type Thermocouple
-436 to 2480°F
-260 to 1360°C
S type Thermocouple
-40 to 3200°F
-20 to 1760°C
R type Thermocouple
-40 to 3200°F
-20 to 1760°C
J type Thermocouple
-328 to 2192°F
-200 to 1200°C
Output
SSR.
Power Supply
24Vdc.
Power Consumption
1VA max.
Power Supply
Operative- 32°F +113°F -0°C +45°C
Humidity
(non condensing) 35-95%.
Housing
Polycarbonate UL94V2 self-extinguishing
Dimensions
0.86 " x 4.4 " x 4 1/4", 22 x 112 mm.
Weight
2.5 oz 75 g.
EMC
For industrial environments.
Immunity: EN 61000-6-2.
Emission: EN 61000-6-4.
DRR450 Single Channel Wiring Connections
Power Supply
DRR450-12AD
Positive
Terminal 3
Negative
Terminal 4
Modbus RS485
Negative 6
Positive 5
SSR Output
Negative 8
Positive 7
Sensor Input
Thermocouples
Positive 1
Positive 3
DRR450-12AD
Pixsys Electronics USA
Pixsys Electronics products are sold and supported by
Datexel LLC in the USA.