TD240-11AD

HMI with integrated PLC 3.5 Inch

• Features
• Thermocouple Inputs
• 4-20mA Inputs
• 0-10V Inputs
• RTD Inputs
• Potentiometer Inputs
• 4-20mA Output
• 0-10V Output
• 16 Digital Inputs and Outputs
• Modbus
• RS232, RS48 ports

• Buy Online  

• Range of HMI's and Panel PC's

• Manual

---

Touch Screen HMI with a built in PLC

This HMI has been replaced by the TD410

The TD240-11AD is a 3.5 inch Touch Screen HMI with a built in PLC. The TD240 can accept inputs from 4 analog sensors and 16 digital inputs. It also has 4 0-10 volt analog outputs and 16 solid state relays up to 700mA each.
The TD240-11AD can accept inputs from K type thermocouples, S type thermocouples, J type thermocouples, T type thermocouples, R type thermocouples, E type thermocouples. Pt100, Ni100, Pt1000 and Pt500 resistance temperature detectors. NTC10K Ohm and PTC1 K Ohm thermistors. 0-20mA, 4-20mA, 0-20mV, 0-1 volt and 0-10 volts.
The output is 0-10V 16 bit and can be set up as a control output with P, PI, PID or PD. Other function blocks include timers, up counters, down counters, mathematics, logic functions and rescale.
Programming is performed by the use of the PLprog software available free of charge and ladder diagrams. It has both RS232 and RS485 serial ports and comes complete with a real-time clock and battery back up.
More analog and digital inputs and outputs can be added with the use of the MCM Data acquisition family of products.