The Temperature Controller DRR224 is a DIN rail mounted device that accepts inputs from most sensors, including thermocouples K, S, R, T, E, N, and B. RTD PT100, PT500, PT1000 NI100, thermistors PTC1K and NTC10K. It also accepts process signals 4-20 mA, 0-20 mA, 0-1 Vol, 1-5 Volts, 0-10 volts, 0-60 mV, and potentiometers with a range up to 150 K Ohms.
The DRR224 is designed to be installed in a control room or MCB on DIN Rail and comes standard with 2 relays, Solid State Output, and a digital Input. The digital input can activate a process that allows the Soft-start, Setpoint change, Hold, Run, Tuning Launch, and Lock the configuration
The DRR224 has a highly visible white LED display that has text messages for alarms and other status messages. The DRR224 can be programmed by the smartphone My-Pixsys APP or by a PC and needn't have power connected while programming, improving the flexibility to allow high-speed configuration to multiply controllers.
The DRR224 is designed to be installed in a control room or MCB on a DIN Rail and comes standard with 2 relays, SSR output and digital input.
Input | °F | °C |
K type Thermocouple | -436 to 2480°F | -260 to 1360°C |
S type Thermocouple | -40 to 3200°F | -20 to 1760°C |
R type Thermocouple | -40 to 3200°F | -20 to 1760°C |
J type Thermocouple | -436 to 2192°F | -200 to 1200°C |
T Type Thermocouple | -436 to 752°F | -260 to 400°C |
E Type Thermocouple | -436 to 1796°F | -260 to 980°C |
N Type Thermocouple | -436 to 2336°F | -260 to 1280°C |
B Type Thermocouple | -328 to 3308°F | 100 to 1820°C |
RTD PT100 | -328 to 1112°F | -200 to 600°C |
RTD PT500 | -328 to 284°F | -200 to 140°C |
NI 100 | -76 to 356°F | -60 to 180°C |
NTC 10K Ohm Thermistor | -40 to 302°F | -40 to 150°C |
PTC 1K Ohm Thermistor | -40 to 302°F | -40 to 150°C |
PT500 | -148 to 1112°F | -100 to 600°C |
PT1000 | -148 to 1112°F | -100 to 600°C |
Current | 4-20 mA | 0-20 mA |
Voltage | 0-5 V | 0-10 V |
Voltage | 0-60 mV | 0-1 V |
Potentiometer | 0-1 Kohm | 0-150 Kohm |
Ni 120 | -76 to 464°F | -60 to 240°C |
NTC 10K B3694K | -40 to 302°F | -40 to 150°C |
PTC 2252 B3976K | -40 to 302°F | -40 to 150°C |
Output | 2 x Relays 2 A 250V AC | 12/24 V DC 25 mA SSR |
Power Supply | 24 to 230Vac/Vdc. | |
Power Consumption | 8 W max. | |
Temperature Range | Operative -32°F +113°F | -0°C +45°C |
Humidity | (non condensing) 35-95%. | |
Housing | Polycarbonate UL94V0 self-extinguishing | |
Dimensions | 2.8 " x 2.5 " x 3.5", | 72 x 90 x 64 mm. |
Weight | 6 oz 185 g. | |
EMC | For industrial environments. | |
Immunity: EN 61000-6-2. | ||
Emission: EN 61000-6-4. | ||
Configuration | PC Configurable, Memory Card |
Power Supply | DRR224-12ABC |
Positive | Terminal 23 |
Negative | Terminal 24 |
Output | |
Current and Voltage | |
Positive | Terminal 13 |
Negative | Terminal 14 |
Relay 1 | |
Normally Closed | Terminal 1 |
Common | Terminal 2 |
Normally Open | Terminal 3 |
Relay 2 | |
Normally Closed | Terminal 6 |
Common | Terminal 5 |
Normally Open | Terminal 4 |
SSR Output | Negative 9 |
Positive 10 | |
Sensor Input | |
Thermocouples | Positive 13 |
Positive 14 | |
Thermistor | Terminal 14 |
Terminal 15 | |
Potentiometer | Terminal 14 |
Common | Terminal 13, 15 |
Digital Input | |
Terminal 16 | |
Terminal 17 |